VS-42H2 – Mounting VS-42H2
Mounting VS-42H2
This section provides instructions for mounting VS-42H2. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount VS-42H2 before connecting any cables or power.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
To mount the VS-42H2 in a rack:
Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/VS-42H2).
To mount the VS-42H2 on a table or shelf:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket on each side of the unit and attach it to a flat
surface.
For more information go to www.kramerav.com/downloads/VS-42H2
To Next Page
Loading...
Need help?
General
