Need help?Do you have a question about the Kramer VS-44H2A and is the answer not in the manual?
General| Certification | CE, WEEE |
|---|---|
| Housing color | Black |
| On/off switch | Yes |
| Rack capacity | 1U |
| Housing material | Aluminum |
| USB connector type | Mini-USB |
| HDMI input ports quantity | 4 |
| Ethernet LAN (RJ-45) ports | 1 |
| Built-in display | No |
| HDCP version | 2.2 |
| Product type | AV matrix switcher |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Sustainability certificates | RoHS |
| Harmonized System (HS) code | 85299097 |
Weight and Dimensions| Depth | 237.2 mm |
|---|---|
| Width | 436.4 mm |
| Height | 43.6 mm |
| Weight | 2000 g |
| Package depth | 330 mm |
| Package width | 525 mm |
| Package height | 107 mm |
| Package weight | 2900 g |
Initial setup and recommendations for the VS-44H2A unit.
Guidelines for using quality cables and proper placement for optimal VS-44H2A performance.
Important caution and warning notes regarding the safe operation and installation of the VS-44H2A.
Details on the VS-44H2A's high-performance AV matrix and equalization technology.
Highlights features like Step-In, EDID management, convenient control options, and cost-effective maintenance.
Identifies and describes the function of each numbered feature on the VS-44H2A front panel.
Details how to connect the VS-44H2A Ethernet port directly to a PC using a crossover cable and configure PC settings.
Step-by-step instructions for powering on the VS-44H2A device and its initialization process.
Explains the meaning of illuminated and flashing buttons and LEDs for signal and acceptor information.
Procedure to lock the VS-44H2A front panel buttons to prevent unintended operation.
Procedure to unlock the VS-44H2A front panel buttons, restoring operational control.
Step-by-step guide to store the current VS-44H2A routing configuration as a setup.
Step-by-step guide to recall a previously stored VS-44H2A routing setup.
Instructions on how to access and navigate the VS-44H2A's web interface using a web browser.
How to manage input/output switching and configure port settings through the web interface.
Procedures for modifying device settings and performing firmware upgrades via the web interface.
How to manage EDID data for inputs and outputs using the web interface.
Steps to enable and configure web page access permissions and security settings.
How to configure timeout settings for the VS-44H2A, such as disabling 5V on video output.
How to configure the display settings for On-Screen Display (OSD) information.
How to manage and configure Step-In devices connected to the VS-44H2A.
How to view device information, web page version, and Kramer Electronics Ltd. details.
How to change the IP address, subnet mask, and gateway for the VS-44H2A's Ethernet connection.
How to reset the VS-44H2A device to its factory default settings and parameters.
Step-by-step instructions for upgrading the VS-44H2A firmware using the web interface.
Process to copy EDID data from default, an input, or an output to VS-44H2A inputs.
How to define access to the web pages by setting user name, password, and inactivity timeout.
Default communication parameters for RS-232/Ethernet, including baud rate, IP address, and default username/password.
Explanation of the structure and format of Kramer Protocol 3000 commands and feedback.
Details what is covered and not covered by the limited warranty, including damage and alterations.
Specifies warranty duration for different products and the remedies provided by Kramer Electronics.
Instructions on how to obtain warranty service, including contact information and required documentation.
Outlines limitations of liability, exclusive remedies, and conditions that may void the warranty.
To Next Page
