Kramer VS-44H2A

Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
28
To copy an EDID from the Default, an Input, or an Output EDID:
1. In the Navigation pane, click EDID.
The EDID page appears (Figure 21).
Figure 21: EDID Page – Selecting an EDID Source
2. Select a connected input or output (from the left) as the EDID source.
When reading from an output, make sure that that output is connected to an
acceptor.
3. Select an input or all the inputs (from the right) to which the EDID is copied.
4. Click COPY.
A message appears.
Figure 22: Copy EDID Message
5. Click Close.
DRAFT