Kramer VS-44H2A

Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
29
To read the EDID from the Default, an Input, or an Output EDID:
1. In the Navigation pane, click EDID.
The EDID page appears (Figure 21).
2. Click default, an Input, or an Output (from the left)
The EDID details appear.
Figure 23: EDID details
To Copy the EDID from a file:
1. In the Navigation pane, click EDID.
The EDID page appears (Figure 21).
2. Click File BROWSE and open the EDID file.
The EDID details appear.
3. Select one or more inputs (on the right).
4. Click COPY.
A message appears (Figure 22).
5. If required, Check adding stereo audio to the selected EDID.
6. Click OK.
7. Follow the instructions on-screen.
When viewing the 7-segment display in the EDID mode, the input with EDID read from a file
displays “L”.
DRAFT