Kramer Electronics Ltd.
VS-44H2A – Mounting VS-44H2A
Mounting VS-44H2A
This section provides instructions for mounting VS-44H2A. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount VS-44H2A before connecting any cables or power.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
To mount VS-44H2A in a rack
Attach both rack ears by removing the screws from each side of the
machine and replacing those screws through the rack ears or place
the machine on a table.
For more information go to www.kramerav.com/downloads/VS-44H2A
To Next Page
Loading...
