Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
4. Refresh webpage.
The webpage username and password prompt appear.
Figure 25: Webpage username and password prompt
5. Enter username and password and click arrow button.
The webpage unlocks.
To disable web page security:
1. In the Navigation pane, click Authentication.
The Authentication page appears (Figure 24).
2. Uncheck the Authenticate Web Pages access checkbox and click the Set changes
button.
The key icon in the upper right corner disappears and web page security is disabled.
Setting Timeout
Use the Timeout Settings web page to set the time delay before shutdown if no input signal
is detected for each output.
To set the timeout:
1. In the Navigation pane, click Advanced Setting.
The Advanced Setting page appears (Figure 26).
Figure 26: Advanced Setting page
2. Set the delay time 0-9999 seconds (where 0 is no timeout) and click SET.
The timeout is set.
To Next Page
Loading...
