Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
Displaying OSD Information
The OSD has three settings:
• Off – Never displayed.
• On – Always displayed.
• Auto – Displayed for a few seconds when a change in settings occurs.
To set the OSD display to On/Auto:
1. In the Navigation pane, click Advanced Setting.
The Advanced Setting page appears (Figure 26).
2. Set OSD Information to On/Auto.
The OSDs are displayed according to settings.
To set the OSD display to Off:
1. In the Navigation pane, click Advanced Setting.
The Advanced Setting page appears (Figure 26).
2. Set OSD Information to Off.
The OSDs are no longer displayed.
To Next Page
Loading...
