Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
Performing a Factory Reset
To reset the device to its factory default values:
1. In the Navigation pane, click Device Settings.
The Device Settings page appears (Figure 19).
2. Click Soft Factory Reset.
The following window appears:
Figure 20: Device Settings Page – Factory Reset
3. Click OK to start factory reset and follow the instructions on-screen.
The device resets to its default parameters.
Performing Firmware Upgrade
To perform firmware upgrade:
1. In the Navigation pane, click Device Settings.
The Device Settings page appears (Figure 19).
2. Click Browse.
A browse window appears.
3. Select the new firmware file, click Upgrade and follow the instructions on-screen.
The new firmware reloads.
Managing EDID
The EDID Management page lets you read the EDID from:
• Any of the outputs.
• The default EDID.
• Any of the inputs.
• A file in your PC (File BROWSE).
The selected EDID can be copied to the selected input/s.
To Next Page
Loading...
