Kramer VS-44H2A

Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
25
Controlling a Connected Device Remotely
To manage a Step-In device (for example, Kramer DIP-30) connected to VS-44H2A remotely.
To control another device remotely:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click the Edit Input icon from an Input button (Figure 16).
The Input Settings group appears (Figure 17).
3. Set input STEP-IN to On.
The Remote device settings icon is enabled.
4. Click the Remote device settings icon from an Input button (Figure 16).
The Step-In Settings group appears (Figure 18).
Figure 18: Step-In Settings group
For details on Setting Step-In Devices, see Setting Step-In Devices on page 33.
DRAFT