Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
Changing Input Name
It may be convenient to change input names to reflect the video sources connected to them.
To change input name:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click the Edit Input icon from an Input button (Figure 16).
The Input Settings group appears (Figure 17).
3. Type a new name (up to 11 characters) and click Save .
The input name changes.
Setting Input HDCP Behavior
To set input HDCP behavior On/Off:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click the Edit Input icon from an Input button (Figure 16).
The Input Settings group appears (Figure 17).
3. Set input HDCP to On/Off.
Input supports an HDCP device if HDCP is set to On.
There are video sources (e.g., some Apple devices) that automatically switch to
HDCP mode if connected to a device that supports HDCP (e.g. VS-44H2A). If an
acceptor/display connected to VS-44H2A does not support HDCP, you might want
to set Input HDCP to Off, so that the video source does not auto-switch to HDCP
mode and the acceptor does not display the video.
To Next Page
Loading...
