Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
Viewing and Adjusting Input Settings
You can view the status of the inputs and adjust their settings via the input buttons.
To view and adjust output settings:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
Figure 16: Switching Page – Input button
2. Click the Edit Input icon from an Input button (Figure 16).
The Input Settings group appears (Figure 17).
Figure 17: Input Settings group
The Input button contains the following elements:
• Name (in Figure 16, the name is HDMI1).
• Signal status (either “No Signal” or “Signal Lock”).
• Edit Input icon to edit the Input button name, set input HDCP behavior (i.e. designate
whether input device supports HDCP), or set Step-In functionality (see Setting Step-In
Devices on page 33).
• Switch Video icon to switch a selected output to this input.
• Remote device setting to manage a Step-In device (for example, Kramer DIP-30)
connected to VS-44H2A (see Setting Step-In Devices on page 33).
To Next Page
Loading...
