Kramer VS-44H2A - Page 24

Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
22
The Switching page appears (Figure 11).
2. Click the Edit Output icon from an Output button (Figure 12).
The Output Settings group appears (Figure 13).
3. Select Output HDCP follow Output.
The HDCP status appears and the output is now always HDCP (independent of the
input).
Adjusting Output Volume
To adjust output volume:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Slide a volume slider (1 to 4) or type a number in the field above the slider and press
Enter (Figure 14).
The output volume in accordance with the slider value.
Figure 14: Volume Adjustment Sliders
Figure 15: Switching Page – Changing the Output Label
DRAFT