Kramer VS-44H2A - Page 23

Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
21
Changing Output Name
It may be convenient to change output names to reflect the video acceptors connected to
them.
To change output name:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click the Edit Output icon from an Output button (Figure 12).
The Output Settings group appears.
Figure 13: Output Settings group
3. Type a new name (up to 11 characters) and click Save
The output name changes.
Switching an Output to an Input
To switch an output to an input:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click an Output button to route an input (Figure 12).
The Output button’s color changes from black to purple.
3. Click the Switch Video icon from a specific input button (1 to 4) (Figure 16).
The Output button displays input name selected.
Ensuring Output Is Always HDCP
It may be convenient (to prevent flickering when switching from an HDCP input to a
non-HDCP input) to set an output to always stream HDCP (whether the input is HDCP or not).
To ensure output is always HDCP:
1. In the Navigation pane, click Switching.
DRAFT