Kramer Electronics Ltd.
VS-44H2A – Using Embedded Web pages
Viewing and Adjusting Output Settings
To view and adjust output settings:
You can view the status of the outputs and adjust their settings via the output buttons.
Figure 12: Switching Page – Output button
The Output button contains the following elements:
• Name (in Figure 12, the name is HDMI1).
• Input source (in Figure 12, HDMI2 is the input source for output HDMI1).
• Acceptor Resolution (in Figure 12, 1920x1080@60 is the acceptor resolution).
• HDCP status appears when output behavior is set to always be HDCP.
• Edit Output icon to edit the output button name or to designate HDCP behavior for
the output button.
• Video Mute icon to substitute the video signal with a black screen.
Muting Video
To Mute Video:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click the Video Mute icon from a specific output button (1 to 4).
The Video Mute icon displays an x and the output selected displays a black screen.
Muting Audio
To Mute Audio:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 11).
2. Click the speaker icon located under a volume slider (Figure 14).
The Audio Mute icon displays an x and the volume of the output selected is muted.
To Next Page
Loading...
