Kramer VS-44DT

40
VS-44DT - Updating the Firmware
9 Updating the Firmware
The VS-44DT uses two microcontrollers that run firmware located in flash memory.
The firmware for these microcontrollers may be upgraded independently.
To upgrade the main microcontroller firmware:
1. From www.kramerav.com/downloads/VS-44DT download the latest firmware
file to your PC.
2. Open Windows Explorer on your PC.
3. Power off the VS-44DT.
4. Connect the VS-44DT to your PC using a USB cable.
5. Power on the VS-44DT while holding down the OFF button.
6. After a few seconds a removable drive is displayed in your Windows
Explorer. Release the OFF button.
7. Copy the firmware file from your PC to the new removable drive.
8. After the file has been transferred, power-cycle the VS-44DT.
As soon as the VS-44DT is ready for operation, the upgrade process is
complete.
To upgrade the I/O microcontroller firmware:
1. Go to www.kramerav.com/downloads/VS-44DT and download the latest
firmware file, to your PC.
2. Open Windows Explorer on your PC.
3. Power off the VS-44DT.
4. Connect the VS-44DT to your PC using a USB cable.
5. Power on the VS-44DT while holding down the STO, RCL and LOCK
buttons.