VS-44DT - Operating the VS-44DT Remotely Using the Web Pages
8.2.1 Updating the Firmware
To update the firmware:
1. Click BROWSE… in the Firmware Upgrade area, and select the new
firmware file (download the latest firmware file from
www.kramerav.com/downloads/VS-44DT).
2. Click START UPGRADE.
The following message appears:
3. Click OK.
The new firmware is installed.
Do not interrupt the procedure or the device may be rendered inoperable.
4. Wait until the device reboots automatically at the end of the procedure.
8.3 Authentication Page
The Authentication page enables you to:
Turn web page authentication on and off
Set the web password
Figure 14: Authentication Page
To Next Page
Loading...
