Kramer VS-44DT

18
VS-44DT - Operating the VS-44DT
To switch one input to all outputs, (for example, Input 2 to all outputs):
1. Press All.
The All button lights red.
2. Press In 2.
The Input 2 button lights and Input 2 is switched to all outputs.
6.2 Storing and Recalling Preset Configurations
You can store up to four preset configurations for instant recall. The bottom row of
input buttons relate to presets one to four.
To store the current configuration in preset 2:
1. Press STO.
2. Press IN 2.
The selection is displayed in the readout.
3. Press STO.
The current configuration is stored in preset 2.
To recall preset 4:
1. Press RCL.
2. Press IN 4.
The selection is displayed in the readout.
3. Press RCL.
The configuration stored in preset 4 is recalled.