Kramer VS-44DT

22
VS-44DT - Configuring the VS-44DT
7 Configuring the VS-44DT
7.1 Using the Menu
The main menu comprises seven sections:
 Audio Setting (see Section 7.1.1)
 RS-232 Routing (see Section 7.1.2)
 Auto Settings (see Section 7.1.3)
 Network Parameters (see Section 7.1.4)
 Ethernet Status (see Section 7.1.5)
 FW version display (see Section 7.1.6)
 Reset to Default (see Section 7.1.7)
 Update Firmware (see Section 7.1.8)
Use the following keys to navigate the menu:
 Menu—Enter the Menu or exit one level when in the Menu
 Enter—Select a parameter/value
 Up (▲) or Down (▼)—scroll up through the parameter
 Right (►) or Left (◄)—scroll down through the value list
Note: If there is no button activity for approximately 20 seconds, the display reverts
back to the Input/Output display.
7.1.1 Setting the Audio Source and Volume
The Audio Settings menu lets you define which of the audio outputs is routed to the
analog audio output and set its volume.
Parameter
Description
Output 1 to 4:
Sets the audio output source (1 to 4)
Volume
Set for each output (0 to 100)
Mute
Set to ON/OFF for each output