Kramer VS-44DT - Protocol 3000 Commands Overview

VS-44DT - Protocol 3000
47
47
 Host Message Format:
Start
Address (optional)
Body
Delimiter
#
Device_id@
Message
CR
 Simple Command – Command string with only one command without
addressing:
Start
Body
Delimiter
#
Command SP Parameter_1,Parameter_2,…
CR
 Command String – Formal syntax with command concatenation and
addressing:
Start
Address
Body
Delimiter
#
Device_id@
Command_1 Parameter1_1,Parameter1_2,…|
Command_2 Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,…|…
CR
 Device Message Format:
Start
Address (optional)
Body
Delimiter
~
Device_id@
Message
CR LF
 Device Long Response – Echoing command:
Start
Address (optional)
Body
Delimiter
~
Device_id@
Command SP [Param1 ,Param2 …] result
CR LF
11.3 Protocol 3000 Commands
This section includes the following commands:
 System Commands (see Section 11.4.1)
 Video Commands (see Section 11.4.2)
 EDID Handling Commands (see Section 11.4.3)
 Audio Commands (see Section 11.4.4)
 Switching Commands (see Section 11.4.5)
 Communication Commands (see Section 11.4.6)