A store and recall facility for preset configurations
Automatic output shutdown if no input signal is detected after a configurable
idle period
An LCD display for easy configuration and operation
Support for Kramer Protocol 3000
A lock button to prevent unwanted tampering with the settings
1U height that fits a standard 19” professional rack enclosure
You can control the VS-44DT using the front panel buttons, or remotely via:
Built-in, embedded web pages using a standard web browser over Ethernet
RS-232 serial commands transmitted by a touch screen system, PC or other
serial controller
The Kramer infrared remote control transmitter
3.1 About HDBaseT™ Technology
HDBaseT™ is an advanced, all-in-one connectivity technology (supported by the
HDBaseT Alliance). It is particularly suitable in the ProAV – and also the home –
environment as a digital networking alternative, where it enables you to replace
numerous cables and connectors by a single LAN cable used to transmit, for
example, uncompressed, full high-definition video, audio, IR, as well as various
control signals.
The products described in this user manual are HDBaseT certified.
3.2 Defining the VS-44DT 4x4 HDMI/HDBT Matrix Switcher
This section defines the VS-44DT.
To Next Page
Loading...
