Kramer VS-44DT

VS-44DT - Configuring the VS-44DT
25
25
3. Press Enter.
The DHCP Settings option is displayed.
4. Using the up (▲) or down (▼) button, move through the menu options until
the IP Settings option is displayed.
5. Press Enter.
6. Using the left (◄) or right (►) button, move the cursor to the digit you wish
to change.
7. Using the up (▲) or down (▼) button, select the required digit.
8. Repeat steps 6 and 7 until the required address is displayed.
9. Press Enter.
The change is saved.
7.4 Resetting the VS-44DT to Factory Default Configuration
To reset the VS-44DT to factory default parameters:
1. Press the Menu button to display the menu.
The menu is displayed.
2. Using the up (▲) or down (▼) button, move through the menu options until
the Reset to Default: option is displayed.
3. Press Enter.
The NO and YES options are displayed.
4. Using the left (◄) or right (►) button, select YES.
5. Press Enter.
The device is reset to factory default parameters and automatically reboots.