VS-44DT - Connecting the VS-44DT
5 Connecting the VS-44DT
Always switch off the power to each device before connecting it to
your VS-44DT. After connecting your VS-44DT, connect its power
and then switch on the power to each device.
Figure 3: Connecting the VS-44DT 4x4 HDMI/HDBT Matrix Switcher
To connect the VS-44DT as illustrated in the example in Figure 3:
1. Connect the HDMI sources, (for example, Blu-ray players) to the HDMI IN 1
and IN 2 connectors.
2. Connect an external IR sensor to the IR 3 IN 3.5mm mini jack.
3. Connect the IR 1 OUT 3.5mm mini jack to an external IR emitter.
To Next Page
Loading...
