Kramer VS-44DT - Figure 9: Switching Button Details

28
VS-44DT - Operating the VS-44DT Remotely Using the Web Pages
To switch an input to an output, select an output and then select the input you want
to switch to that output. Figure 9 defines the Switching area:
Figure 9: Switching Button Details
#
Item
Description
1
Four output buttons
Click on the button to select an output
2
Mute button
Click to mute the output. The mute output is indicated by
a small red x on top of the icon
3
Edit button
Click to edit the output Properties
4
Input number
Indicates which input is switched to this output.
0 indicates that no input is connected
5
Four input buttons
Click to select an input
6
Output number
Indicates the output number
7
Signal Status
Indicates the signal status