Kramer VS-44DT - Getting Started with VS-44 DT; Achieving Best Performance Tips; Safety Instructions and Warnings

2
VS-44DT - Getting Started
2 Getting Started
We recommend that you:
 Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
 Review the contents of this user manual
Go to www.kramerav.com/downloads/VS-44DT to check for up-to-date
user manuals, application programs, and to check if firmware upgrades
are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
 Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
 Do not secure the cables in tight bundles or roll the slack into tight coils
 Avoid interference from neighbouring electrical appliances that may
adversely influence signal quality
 Position your VS-44DT away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the
wall before installing