Kramer VS-62H - Connecting the Remote Contact-Closure Switches; Figure 6: Internet Protocol Properties Window

VS-62H - Connecting the VS-62H 6x2 HDMI Matrix Switcher
13
Figure 6: Internet Protocol Properties Window
7. Click OK.
8. Click Close.
6.2.2 Connecting the Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of the VS-62H to the Ethernet port on a network
hub or using a straight-through cable with RJ-45 connectors.
6.3 Connecting the Remote Contact-closure Switches
You can connect up to six remote, contact-closure switches per output to control
the VS-62H remotely. These switches replicate the Input selection buttons on the
front panel of the VS-62H.