10 Operating the VS-62H Remotely via the Web
Pages
The VS-62H can be operated remotely using the embedded Web pages. The Web
pages are accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
Perform the procedures in Section 6.2
Ensure that your browser is supported (see Section 12)
Ensure that JavaScript is enabled
10.1 Browsing the VS-62H Web Pages
Note: In the event that a Web page does not update correctly, clear your Web
browser’s cache (by pressing CTRL-F5).
To browse the VS-62H Web pages:
1. Open your Internet browser.
2. Type the IP number of the device (see Section 6.2) in the Address bar of
your browser.
The Loading page appears.
Figure 9: The Loading Page
Immediately after the Loading page, the General Info page appears which displays
information related to the device and the Web page version.
To Next Page
Loading...
