9 Using the P3K Wizard
P3K is a Kramer software program for upgrading the machine firmware and
accessing and changing device parameters. The P3K program can be
downloaded from the Kramer Web site at www.kramerelectronics.com
.
9.1 Changing the Device Parameters
To change the device parameters do the following:
1. Connect a PC to the VS-88HDxl using any one of the following
connections:
• Connect a serial cable from an RS-232 9-pin D-sub rear panel
port on the PC to the VS-88HDxl as explained in section
6.4.
• Connect an RJ-45 Ethernet cable from the Ethernet port on
the PC to the Ethernet port on the VS-88HDxl.
2. Open the P3K Wizard by double-clicking the desktop icon P3K Wizard.
The P3K Wizard screen appears
1
:
Figure 10: P3K Wizard Screen
3. Click the Connect button to open the Connect window.
1 The screens appearing in this manual are examples of the process. The actual screens may differ in their content.
To Next Page
Loading...
