6.5 Locking and Unlocking the Front Panel
To prevent unintended tampering with the unit via the front panel buttons, lock
your VS-88H.
To lock the VS-88H:
Press the PANEL LOCK button on the front
6.6 Resetting the Ethernet Configuration to Default Values
Power cycle the unit while holding in the Factory Reset button, located on the rear
panel of the unit.
6.7 Controlling Configuration via the Ethernet Port
To control several units via Ethernet, connect the Master unit (Machine # 1)
Ethernet port on your PC. Use your PC to configure the initial settings (see
Section 5.1).
To Next Page
Loading...
