Kramer VS-88H2 Quick Start Guide

VS-88H2 Quick Start
P/N:
2900- 301150QS
Rev:
1
Scan for full manual
VS-88H2 Quick Start Guide
This guide helps you install and use your VS-88H2 for the first time.
Go to www.kramerav.com/downloads/VS-88H2 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VS-88H2 4K HDMI 8x8 Matrix Switcher
1 Quick start guide
1 Set of rack
ears
1 Power cord
4 Rubber feet
Step 2: Get to know your VS-88H2
#
Feature
Function
1
IN SELECTOR Buttons
Press to select the input (1 to 8) to switch after selecting an output (also used for storing
machine setups in the STO-RCL modes and for selecting a pattern in the Pattern mode).
2
OUT SELECTOR Buttons
Press to select an output (1 to 8) to which the input is routed. Also used for storing machine
presets.
3
MUTE/PATTERN Button
Press to view the current pattern status and select the output/s to which a pattern is routed.
Press to mute audio or video on a selected output when D-AUDIO and/or VIDEO buttons are
pressed (lit).
4
ALL Button
Press to perform an action on all outputs (for example setting Mute mode, Pattern mode and
so on).
For switching, press ALL and then a specific IN button to route the selected input to all
outputs. For example, press ALL and then IN 2 to route input 2 to all the outputs.
5
STO Button
Press STO to store the current switching setting to a preset button.
6
RCL Button
Press RCL to recall the switching setting from a preset button.
7
ARC
For setting ARC mode on the inputs (see Step 6: Operate the VS-88H2).
8
D-AUDIO Button
Press to enable digital audio routing. When pressed together with VIDEO, the digital audio is
routed together with the video signal.
9
VIDEO Button
Press to select video inputs. When pressed together with D-AUDIO, video is switched
together with audio.
10
LOCK Button
Press and hold to toggle between locking and releasing the front panel buttons.
Press to save the following setups: HDCP (On/Off), ARC, Fast Switch and Switch mode.
11
EDID Button
For setting the EDID on the inputs (see Step 6: Operate the VS-88H2).
12
OUTPUT/INPUT
7-segment LED Display
Displays the selected inputs switched to the outputs (marked above each input).

Kramer VS-88H2 Specifications

General

HDCP	Yes
HDCP version	1.4/2.2
Product type	AV matrix switcher
Audio channels	7.1
Control type	Buttons
Housing color	Black
USB connector type	Mini-USB, USB Type-A
USB ports quantity	2
HDMI input ports quantity	8
Ethernet LAN (RJ-45) ports	1
Display type	LCD
Input current	0.6 A
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (max)	- W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	RoHS
Cables included	AC

Weight and Dimensions

Depth	183 mm
Width	436.4 mm
Height	43.6 mm
Weight	2400 g
Package depth	330 mm
Package width	525 mm
Package height	107 mm
Package weight	3300 g