Kramer VW-9

Kramer Electronics Ltd.
VW-9 – Operating and Controlling VW-9
11
Configuring Screen Setting Parameters
VW-9 enables you to set the display settings, output resolution, and EDID.
To set the OSD display parameters:
1. On the front panel press MENU. The menu shows.
2. Select SCREEN SETTING > DISPLAY SETTING press Enter and define the image
parameters based on the information in the following table:
Menu Item
Function
Display Column
Set the horizontal position of the OSD.
Display Row
Set the vertical position of the OSD.
H.Bezel Correction
Set the horizontal Bezel correction.
V.Bezel Correction
Set the vertical Bezel correction.
Rotation
Select the rotation angle R90° (clockwise), L90° (anti-clockwise), or
Off (the default is Off).
OSD Display parameters are set.
To select the output resolution parameters:
1. On the front panel press MENU. The menu shows.
2. Select SCREEN SETTING > OUTPUT RESOLUTION press Enter and set the output
resolution parameters based on the information in the following table:
Menu Item
Function
Output Resolution
4096x2160@60Hz, 4096x2160@50Hz, 3840x2160@60Hz, 3840x2160@50Hz,
3840x2160@30Hz, 1920x1200@60Hz, 1920x1080@50Hz,1920x1080@30Hz,
1280x720@60Hz, 1280x720@30Hz, 1600x1200@60Hz, 1920x1200@60Hz,
2048x2048@57Hz
Output resolution parameters are set.
To manage the EDID:
1. On the front panel press MENU. The menu shows.
2. Select SCREEN SETTING > EDID and define the EDID parameters based on the
information in the following table:
Menu Item
Function
EDID
Default EDID (4K60).
EDID on Output 1
The Output 1 EDID is applied to all the inputs.
EDID is defined.
Configuring the Video Wall
To set the audio source:
1. On the front panel press MENU. The menu shows.
2. Select VIDEO WALL > AUDIO SOURCE press Enter and define the audio source
parameters based on the information in the following table: