3. Click Apply.
The EDID for Output 1 is now copied to all the connected inputs.
To read the EDID from the Default:
1. From the Navigation List, click Screen Settings.
2. Below EDID, in Management, click the down arrow and choose Default.
The EDID details show.
Figure 15: EDID Details
3. Click Apply.
The EDID is now set to use the Default.
Configuring the Screen Layout
The VW-9 can build video wall array systems 3X3, 2x4, 5x2, 1x10 and so on.
To configure the screen layout:
1. From the Navigation List, select Screen Settings.
2. Below Screen settings, use Column and Row to configure the screen layout.
In this example, Column is set to 3 columns and Row is set to 3 rows:
Figure 16: Example Screen Layout
3. To save the changes, click Apply.
4. Reload the webpage.
The Screen layout is now configured.
To Next Page
Loading...
