Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Defining VW-9 3x3 Video Wall Driver with Multiviewer 4
Mounting VW-9 6
Connecting VW-9 7
Connecting the Output to an Unbalanced/Balanced Stereo Audio Acceptor 8
Connecting to VW-9 via RS-232 8
Operating and Controlling VW-9 9
Using Front Panel Buttons 9
Controlling Device via OSD Menu 10
Operating via Ethernet 16
Acquiring and Setting Current EDID Using RS-232 Serial Commands 19
Using VW-9 Embedded Webpages 20
Browsing VW-9 Webpages 21
Configuring the Screen Settings 22
Configuring the Output Resolution Settings 24
Managing EDID 24
Configuring the Screen Layout 25
Setting Up the Multi-Viewer Video Wall Page 26
Defining System Settings 33
Viewing the Ethernet Type (Static or HDCP) 33
Viewing the MAC Address 33
Changing the IP Address 33
Setting the Unit’s ID 34
Viewing the Fan Speed 35
Resetting VW-9 to its Factory Default 35
Resetting Device 35
Upgrading Firmware 36
Technical Specifications 37
Default Communication Parameters 38
Default EDID 38
Protocol 3000 41
Understanding Protocol 3000 41
Protocol 3000 Commands 42
Result and Error Codes 53
To Next Page
Loading...
Need help?
General
