Setting Up the Multi-Viewer Video Wall Page
The Multi-Viewer mode is multi-view video wall which presents multiple windows
simultaneously from a maximum of four sources on the video wall system. User can configure
the windows to display across the multi-screen arrays, resized, and repositioned.
Various screen layouts are available in Multi-Viewer mode:
• 5 sets of pre-defined layout mode.
• 7 sets of custom multi-view layout modes.
Audio Settings:
To set the audio:
1. From the Navigation List, select Multi-Viewer.
2. In Audio source, click the down arrow and select a source to output the audio:
INPUT 1, INPUT 2, INPUT 3, or INPUT 4, or select MUTE to mute the audio source.
Figure 17: Embedded Webpages – Setting the Source to Output Audio
3. Click Apply.
The audio source to output is set.
To Next Page
Loading...
