Kramer VW-9

Kramer Electronics Ltd.
VW-9 – Using VW-9 Embedded Webpages
24
Configuring the Output Resolution Settings
VW-9 allows users to select an output resolution.
To set the Output:
1. From the Navigation List, select Screen Settings.
2. Below Output Settings, in Resolution, click the down arrow and choose an output
resolution.
Figure 13: Embedded Webpages – Setting the Output Resolution
3. Click Apply.
The output resolution is set.
Managing EDID
The EDID Management page lets you read the EDID from:
• Output 1.
• The default EDID (4K60).
The EDID is copied to selected input(s).
To copy the EDID for INPUT 1 to all connected inputs:
1. From the Navigation List, select Screen Settings.
2. Below EDID, in Management, click the down arrow and choose Copy.
Figure 14: EDID Page – Selecting an EDID Source