Kramer VW-9 - Page 33

Kramer Electronics Ltd.
VW-9 – Using VW-9 Embedded Webpages
31
To adjust the tier setup:
Tier 1, Tier 2, Tier 3, and Tier 4 indicate the tier of the overlapped window.
Different windows cannot have the same tier.
The tier adjustment option is only available in Custom layout mode.
1. From the Navigation List, select Multi-Viewer > Layout settings.
2. In Custom, select a custom layout (1-7).
Tier 1 is always the background layer.
3. Click a window’s tier number to change its tier. For illustration, in window C, click Tier2 to
change its number.
The other window’s tier numbers change accordingly.
Figure 22: Webpages – Adjusting the Tier Number
Alternatively, move any window (B, C or D) to change its tier.
4. To save the changes, click Apply.
The tier is setup.
To disable a window(s):
1. From the Navigation List, select Multi-Viewer > Layout settings.
2. In Custom, select a custom layout (1-7).
3. To disable a window, do one of the following:
• Click the “X” icon of each window in the graphic layout area.
Or,
• Click the “X” icon of each window that shows at the bottom of the webpage.
Figure 23: Webpages – Disable a Window in Graphic Layout
4. To save the changes, click Apply.
The selected window(s) are disabled.