Kramer VW-9

Kramer Electronics Ltd.
VW-9 – Protocol 3000
52
Function
Description
Syntax
Parameters/Attributes
Example
W-POS?
Get window position.
COMMAND
#W-POS?win_num<CR>
FEEDBACK
~nn@W-POSwin_num,x0,y0,width,height<CR><LF>
win_num – Window number setting
window position:
1 – Win A
2 – Win B
3 – Win C
4 – Win D
x0 – Horizontal coordinate origin (0 to 210)
y0 – Vertical coordinate origin (0 to 90)
width – Window width (30 to 240)
height – Window height (30 to 120)
Get window B position
and size:
#W-POS?2<CR>
W-SATURATION
Set image saturation per
output.
Value limits can vary
for different devices.
Value is a property of
input connected to current
output. Changing input
source might cause
changes in this value
(refer device definitions).
In devices that enable
showing multiple outputs
on one display – each in a
separate window – this
command relates only to
the window associated
with the output indicated
in the out-index
parameter.
COMMAND
#W-SATURATIONout_index,value<CR>
FEEDBACK
~nn@SATURATIONout_index,value<CR><LF>
out_index – Number that indicates the
specific output:
* – All
value – Saturation value (0 to 100)
Set saturation for output
1 to 50:
#W-
SATURATION1,50<CR
>
W-SATURATION?
Get image saturation per
output.
Value limits can vary
for different devices.
Value is a property of
input connected to current
output. Changing input
source might cause
changes in this value
(refer device definitions).
In devices that enable
showing multiple outputs
on one display – each in a
separate window – this
command relates only to
the window associated
with the output indicated
in the out-index
parameter.
COMMAND
#W-SATURATION?out_index<CR>
FEEDBACK
~nn@W-SATURATIONout_index,value<CR><LF>
out_index – Number that indicates the
specific output:
* – All
value – Saturation value (0 to 100)
Set window position:
#W-
SATURATION?1<CR>
WND-BRD
Enable/disable window
border.
Available only for
#VIEW-MOD 3 (QUAD)
and 5 (DUAL POP).
COMMAND
#WND-BRDwin_num,enable<CR>
FEEDBACK
~nn@WND-BRDwin_num,enable<CR><LF>
win_num – *
enable –
0 – Disable
1 – Enable
Set window position:
#WND-BRD1,1<CR>
WND-BRD?
Get window border status.
Available only for
#VIEW-MOD 3 (QUAD)
and 5 (DUAL POP).
COMMAND
#WND-BRD?win_num<CR>
FEEDBACK
~nn@WND-BRDwin_num,enable<CR><LF>
win_num – *
enable –
0 – Disable
1 – Enable
Set window position:
#WND-BRD?1<CR>