16
Commissioning
13.
Push on HP hose to gun.
14.
Screw together HP hose and gun
pressure-tightly.
Take care that all screw connections are pressure-tight. A leakage of
gun, high-pressure hose or hose drum has to be repaired at once.
Leakages lead to an increased wear and to a possible malfunction of
the delayed motor cut-out.
1.
Ignition switch to -OFF- position
Usage as a cold water high-pressure cleaner
When starting the cleaning process do
not aim the water jet towards the object
you want to clean for at least 30 seconds.
Maybe the water inside the combustion
chamber has changed colour due to the rest
time.
Start cleaning process.
2.
Switch on main switch with disen -
gaged spray gun. Vent high-pressure
cleaner: Pull and release trigger of
spray gun various times.
Detergent valve must be closed!
(Turn knob to extreme right position
"close")
To Next Page
Loading...
Need help?
General
