17
During high-pressure operation (above 30 bars) the temperature
may not exceed 90 °C.
Steam level (90 °C - 150 °C)
During steam operation the pressure may not exceed 30 bar!
To reach the steam level (above 90 °C water temperature) adjust the
pressure below 30 bar and choose by means of the thermostat the
desired temperature of up to max. 150 °C.
In the case of machines with hose drums, the high pressure hose
must always be unwound completely.
Usage as a hot water high pressure cleaner
Start cleaning.
4.
Start ignition. The water is heated up
and constantly kept at the set
temperature.
3.
Switch on main switch with disen gaged
spray gun. Vent high-pressure cleaner:
Pull and release trigger of spray gun
various times.
Detergent valve must be closed!
(Turn knob to extreme right position
"close")
Method same as with cold water
high-pressure cleaner, then ...
1.
Set desired temperature at
the thermostat.
(Min. temperature 40 °C)
2.
Engage fixing brake before starting the
cleaning process!
To Next Page
Loading...
Need help?
General
