Range of application
This machine may only be used for cleaning facades, vehicles, containers, pavement
slabs, stables, machines and smilar objects.
Inspections
The machine must be inspected according to the “Guidelines for Liquid Spray Devices”
at least once every 12 months by a qualified person, to ensure that continued safe
operation is guaranteed. The results of the inspection are to be recorded in writing. This
may be done in any form. For inspection reports see pages 34 - 35.
High-pressure cleaners used for commercial purposes have to be
checked by a qualified person at least every 12 months!
Accident prevention
The machine is designed for accidents to be impossible (if used according to these
instructions). Please read safety notes included in these instructions carefully before
using the machine and act correspondingly. Operating staff has to be instructed accor-
ding to this manual. The “Guidelines for Liquid Spray Devices” must be complied with.
Setting up - Location
Neither set up and operate the machine in rooms where there is a risk
of fire or explosion nor put it into puddles. Do not use the machine
under water.
During the combustion process air is needed and exhaust gas emerges. If the
machine is operated in a confined space, precautions have to be taken to safely
exhaust the fumes. Furthermore a sufficient ventilation has to be provided for.
Never shut the exhaust gas outlet on top of the machine. Never stoop over this
aperture and never reach into it. Emerging gases are extremely hot!
Do not jam the trigger of the gun during operation!
When carrying through service and maitenance tasks the machine has to be cut off
the power supply system. Put main switch to "0" and pull plug out of socket.
Never operate the machine if cables or other safety-relevant parts (e.g. excess pres-
sure valve, high-pressure hose, spraying devices, etc.) are defective.
6
General rules
Safety notes
To Next Page
Loading...
Need help?
General
