Kreg Crown-Pro - Page 3

www.kregtool.com
Kreg Info
Congratulations on choosing a Kreg Crown-Pro
™
!
Be sure to read the instructions and the safety warnings
completely before using this tool.
In this instruction manual we will show you how to properly use
your Kreg Crown Pro
™
. This manual will explain how to position
the tool and correctly compensate for the molding’s unique spring
angle, as well as how to adjust your saw to match the angle,
and more. However, there is more to know about the installation
process, and Kreg
®
recommends and suggest this process found
at www.kregtool.com. Visit the Crown-Pro
™
product page and
watch a step-by-step process and demonstration as well as tips
and tricks to help you along the way.
Quick Tips for Installation:
1. For added strength, add wood glue to all joints.
 2.Useanishingnailgunforspeedandsimplifyinginstallation.
 3.Makeyourcutsabitlongerandmakeadjustmentsuntilitts
as desired.
4. Install a backer board ahead of time for easier nailing.
5. No backer board: Be sure to nail into the wall framing.
6. Paint or stain the molding before attaching it to the wall.
7. Get an extra hand for help. If no help is available, use a
nail to hold up the other end
For more information you can speak to our friendly customer
service team at 1.800.447.8638 or emailing directly at
custservice@kregtool.com.