Operation
To prevent unauthorized use of the machine, a hole through the
switch (31) allows it to be locked in the o position with a padlock
(not included).
Switch lock-out
You can store the hex wrench (13), #2 square driver bit (34), and
optional Micro and HD drill guides and bits in the accessory tray (35)
located under the access panel (11).
Accessory storage
For exibility in securing your Foreman to a work surface, the foot
(36) at each corner of the machine base features a at surface
for temporarily clamping the machine to a work bench as well as
a mounting hole (37) for more permanent attachment. (The holes
accept #14 x 2
1
⁄2" Kreg HD pocket-hole screws.)
Secure mounting
36
37
31
35
To Next Page
Loading...
Need help?
General
