EasyManua.ls Logo

Kreg KHI-CDIJ - Safety Precautions

Kreg KHI-CDIJ
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Safety Precautions
WARNING Before using a power tool with this product, read and follow the tool manufacturer’s
instructions and safety precautions in addition to the safety precautions below to reduce the risk
of serious injury from hazards such as re, electric shock, or rotating drill bit.
Always follow the written safety instructions for using your jig.
Follow your drill manufacturer’s safety guidelines.
Always wear personal protective equipment certied as such, including safety glasses,
hearing and respiratory protection. When using a power tool, always follow the manufacturer’s
personal protective equipment requirements.
Do not allow familiarity gained from frequent use of your tools to replace safe work practices.
A moment of carelessness is sufcient to cause severe injury.
WARNING Follow your clamp manufacturer’s safety guidelines. Ensure that the jig is clamped
securely prior to hanging the cabinet door.
WARNING Do not exceed the rated weight limit capacity of the jig. Exceeding the weight limit
with doors over 25 lbs. may cause the product to fail which can result in serious injury.
WARNING When mounting doors, take special care to avoid injury. Ensure the cabinet door is
properly placed on the jig and supported with one hand.
WARNING Avoid awkward hand positions where a sudden slip could cause contact with the
rotating bit.
WARNING Do not operate this tool or any machinery while under the inuence of drugs, alcohol,
or medications.
WARNING This product can expose you to chemicals including Carbon 1333-86-4 and other
chemicals, which are known to the State of California to cause cancer and reproductive harm.
Formore information go to www.P65Warnings.ca.gov.
Table of Contents
Safety Precautions . . . . . . . . . . . . . 2
Pre-Assembly . . . . . . . . . . . . . . . . 3
Recommended Tools/Materials . . . . . 3
Product Description . . . . . . . . . . . 3
Assembly . . . . . . . . . . . . . . . . . . 4
Before you Begin. . . . . . . . . . . . . 4
Jig Setting and Shim Use Chart . . . . . 6
Operation . . . . . . . . . . . . . . . . . . 8
Using the Jig . . . . . . . . . . . . . . . 8
Maintenance . . . . . . . . . . . . . . . . 10
Care and Cleaning . . . . . . . . . . . . . 10
Troubleshooting. . . . . . . . . . . . . . . 10
Adjusting for Cabinet Door Weight. . . . 10
Recommended Accessories (Not Included) 10

Table of Contents

Related product manuals