Rev. Date: 3/14/18 Page 38
MODEL #500
SHREDDER
UPPER HOPPER and LOWER BASE UNIT ASSEMBLY
PARTS LIST
Item # Part # Description
1 501-R1 Hopper
1-1 501-ASSY Hopper Assembly (includes: hopper, agitators, and bearing assemblies)
2 509-P Guard, Screen
3 KMC-203 Decal, Emergency Stop
4 508 Switch, Kill, Assembly (includes: Kill Switch and Contact-Decal not included)
4-1 8075-1 Contactor, Kill Switch
4-2 508-2 Pushbutton, Kill Switch
5 505-1 Agitator, 1" (2)
6 564 Seal, Felt, 1" X 3 1/4" (4)
7 563 Bearing Insert only, 1" (4)
7-1 565 Housing, Flange, 2-Bolt, 1" (8)
8 588 #40 Sprocket,24T x 1" (2) (agitator)
9 109015 #40 Sprocket,30T x 1" (airlock) (U.S.)
9 588 #40 Sprocket,24T x 1" (airlock) (Overseas)
10 110 Hopper Bar (2)
10-1 FN009 1/2" Pushnut (4)
11 ELU07-583-A Motor, Agitator, Assembly, 1 H.P., T.E.F.C. (120V, 60 Hz.)
11 ELU07-583-B Motor, Agitator, Assembly, 1 H.P., T.E.F.C. (240V, 60 Hz.)
12 ELU07-585-A Motor, Agitator, Assembly, 1 H.P., T.E.F.C. (230V, 50Hz.)
13 513-R3 Reducer, Speed, In-Line 28:1 1" Dia. Shaft
13-1 513-MB Bracket, Motor Mount #513-R3 Speed Reducer
14 109015 Sprocket, 30T x 1" (2) (60 Hz.) (50 Hz.) (speed reducer)
14-1 562 Key, 1/4" x 1 1/4"
15 589 Chain, #40 x 72"
16 109014 Chain, #40 x 37" (U.S.)
16 109017-3 Chain, #40 x 36" (Overseas)
17 518-R1 Base Frame, Shredder
18 517-R2 Airlock Assembly (does not include sprocket, key, idler sprocket)
18-1 517-1-R3 Chamber, Airlock, 12" x 10" (2" input - 3" output)
18-2 517-2 Plate, Top, Airlock, 10" (6)
18-3 517-3 Seal, Airlock, 10" (6) 1/4" Rhinohyde
18-3A 517-3-ASSY
Seal Assy, Airlock, 10" (6) (includes:Top Plate, Seal, and Bottom Plate)
18-4 517-4 Plate, Base, Airlock, 10" (6)
18-5 517-5-R4 Shaft, Airlock, 15 13/16"
18-6 517-6 Bearing, 4-Bolt Casted, 1" Bore (2)
18-7 517-7 Seal, Felt, Airlock ,1" Bore (2)
19 432 Sprocket, Idler, #40 17T x 5/8"
19-1 FSB120 SB, 5/8" x 3/4" Shoulder Bolt (2)
19-2 40052 Nut, Square, 1/2-13 x 1"
To Next Page
Loading...