Enter hydraulic oi/
Remove the motor box off, and then turn the oil cap anti-clockwise to open the oil inlet.
Fill in the hydraulic oil 30# from the oil inlet as shown in the figure.
Oil inlet
Oil inlet
NOTE
• Make sure that there is sufficient oil in the tank when the machine in working
• Do not overfill the oil tank, otherwise it may overflow when the oil warms up and
expands.
• Make sure that the oil tank cap is properly closed before working.
6.
OPERATION
During all operations, keep hands and other parts of the body as far as possible from
moving parts of the machine. With necklace, bracelets and too large clothes, can be
dangerous for the operator.
To Next Page
Loading...