To Next PageTo Next Page
Need help?Do you have a question about the KROHNE IFC 050 and is the answer not in the manual?
General| Type | Electromagnetic Flowmeter |
|---|---|
| Measurement Range | 0.1 to 10 m/s |
| Output Signal | 4-20 mA, pulse, frequency |
| Application | Chemical, pharmaceutical, water and wastewater industries |
| Operating Pressure | Up to 40 bar (580 psi) |
| Lining Material | PTFE |
| Electrode Material | Stainless steel, Hastelloy, titanium |
| Housing Material | Aluminum |
| Communication | HART |
| Power Supply | 100-230 V AC, 24 V DC |
| Protection Class | IP67 |
| Approvals | ATEX |
| Accuracy | ±0.2% of measured value |
Introduction to the IFC 050 signal converter and its purpose.
Purpose of the device and its compliance with standards.
Copyright, disclaimer, liability, warranty, and documentation policies.
Essential safety guidelines for operating personnel.
Items included in the package and available device versions.
Table of compatible flow sensor and IFC 050 unit combinations.
Explanation of information found on the device nameplate.
General guidance, storage, transport, and installation specifications.
Instructions for mounting compact and wall housing versions.
Safety warnings and important notes for electrical connections.
Notes on signal cable A and field current cable C, including customer requirements.
Steps for preparing and connecting signal and field current cables.
Procedures for connecting cables to the signal converter and flow sensor.
Schematic diagrams for signal and field current cable connections.
Instructions for grounding the flow sensor and connecting the power supply.
Description of CG number, output versions, and basic I/Os.
Detailed explanation of current, pulse, and status outputs.
Detailed explanation of current, pulse, and status outputs.
Information on status outputs and limit switches.
Steps for connecting output cables and ensuring housing integrity.
Steps for connecting outputs and laying cables correctly.
Notes, diagrams, and symbols for output connections.
Notes, diagrams, and symbols for output connections.
Details on current output active/passive (HART®).
Notes, diagrams, and symbols for output connections.
Technical specifications for passive pulse/frequency output.
Notes, diagrams, and symbols for output connections.
Technical specifications for active pulse/frequency output.
Notes, diagrams, and symbols for output connections.
Technical specifications for passive status output/limit switch.
Notes, diagrams, and symbols for output connections.
Details on active and passive HART® connections.
Pre-power-on checks and procedures.
Initial startup and self-test sequence.
Warnings for users with pacemakers regarding magnet pencil use.
Overview of the device's display and physical controls.
Overview of the device's display and physical controls.
Explains the function of each key in different modes.
Examples of displays for measuring values and submenu selection.
Display formats for setting and previewing parameters.
Outline of the device's menu hierarchy and navigation.
Detailed tables of functions and settings for menus.
Functions and settings within the "A quick setup" menu.
Detailed tables of functions and settings for menus.
Functions and settings within the "B test" menu.
Detailed tables of functions and settings for menus.
Functions and settings within the "C setup" menu.
Detailed tables of functions and settings for menus.
Configuration of I/O hardware, current, pulse, status, and limit switch outputs.
Detailed tables of functions and settings for menus.
Settings for pulse shape, width, rate, polarity, and cutoff for frequency output.
Detailed tables of functions and settings for menus.
Settings for limit switch threshold, polarity, time constant, and signal inversion.
Configuration and operation of counters 1 and 2.
Detailed tables of functions and settings for menus.
Configuration of HART® communication, address, message, and units.
Device information, display settings, language, and magnet key configuration.
Detailed tables of functions and settings for menus.
Device information, display settings, language, and magnet key configuration.
Includes password settings, special functions like reset, save/load settings.
Detailed tables of functions and settings for menus.
Device information, display settings, language, and magnet key configuration.
Configuration of units, free units, and quick setup options.
Detailed tables of functions and settings for menus.
Instructions for setting custom units and conversion factors.
Detailed explanations of specific functions.
Step-by-step guide to resetting counters via quick setup.
Detailed explanations of specific functions.
Steps to delete error messages from the quick setup menu.
Information on operational faults and diagnostic messages.
Information on operational faults and diagnostic messages.
Details on device faults, application errors, and their remedies.
Information on operational faults and diagnostic messages.
Information on measurements outside specified accuracy limits.
Information on operational faults and diagnostic messages.
Information on counter status, power failures, and conductivity readings.
Information on spare parts availability and offered services.
Procedures and safety precautions for returning devices for service.
Procedures and safety precautions for returning devices for service.
Form for returned devices and disposal guidelines.
Explanation of the electromagnetic flowmeter's operating principle.
System, design, sensor, converter, options, counter, verification, and interfaces.
System, design, sensor, converter, options, counter, verification, and interfaces.
Details on standard and optimized measuring accuracy.
System, design, sensor, converter, options, counter, verification, and interfaces.
Temperature, pressure, conductivity, ingress protection, and installation requirements.
General electrical connection standards, power supply, consumption, and cable entries.
Overview of output types and general operating data.
Overview of output types and general operating data.
Specifications for current output (without/with HART®, active/passive).
Overview of output types and general operating data.
Specifications for pulse/frequency output (active/passive).
Overview of output types and general operating data.
Specifications for status output, limit switch, and Modbus communication.
CE marking, shock/vibration resistance, and NAMUR recommendations.
Physical dimensions and weight of the device.
Detailed dimensions and weight for the wall version housing.
Physical dimensions and weight of the device.
Detailed dimensions and weight for the compact version housing.
Physical dimensions and weight of the device.
Dimensions and specifications for the wall mounting plate.
Flow rate data in m/s and m³/h for various DN sizes.
Flow rate data in ft/s and US gallons/min for various DN sizes.
Details on calibration and accuracy limits of electromagnetic flowmeters.
