Need help?Do you have a question about the KROHNE MagCheck and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Measuring range | 10 m/s |
| Power supply | Battery |
| Output | Pulse, frequency |
| Measurement Principle | Electromagnetic |
| Material | Stainless steel |
| Connection | Various, depending on the version. Typically flanges. |
Overview of the MagCheck device and its purpose.
Using MagCheck for automatic verification of IMoCom converters.
Using MagCheck as a manual signal calibrator for converters.
Steps required before connecting and operating the MagCheck device.
Details on the cables used for connecting MagCheck to converters and PC.
Visual guides for connecting MagCheck to various KROHNE converters.
Explanation of the MagCheck device's display and input controls.
Describes the initial startup sequence of MagCheck.
Guidance on navigating and using the MagCheck device's menu system.
Overview of the functional parts and structure of the MagCheck menu.
Detailed steps for performing automatic verification with IMoCom converters.
Procedures for using MagCheck as a manual calibrator for converters.
Specific menu functions for performing manual calibration tests.
Simulating flow signals for converter calibration.
Displaying current output values during simulation.
Displaying pulse output values during simulation.
Displaying field current measurements.
Accessing hardware information for IMoCom converters.
Performing a reset on IMoCom converters.
Displaying MagCheck serial number and software version.
Selecting the display language for MagCheck.
Transferring verification data from MagCheck to a PC.
Requirements for installing and running the MagCheck PC software.
Step-by-step guide for installing the MagCheck PC software.
Configuration options for the MagCheck PC program.
Instructions for establishing a connection between MagCheck and a PC.
Process for transferring and saving verification data from MagCheck to a PC.
Procedures for managing verification files on external storage.
Analyzing verification data trends graphically and numerically.
Options for printing trend analysis reports.
Options for printing verification certificates.
Understanding and interpreting accuracy readings for key parameters.
Interpreting coil resistance values and potential failure modes.
Analyzing electrode resistance when the pipe is full.
Analyzing electrode resistance when the pipe is empty.
Diagnosing and understanding coil insulation test results.
Understanding factors not covered by the MagCheck verification results.
Information on the required annual recalibration of the MagCheck device.
Details needed when contacting KROHNE support for software issues.
List of available spare parts for the MagCheck device.
To Next Page