Need help?Do you have a question about the KROHNE H250H and is the answer not in the manual?
General| Process Pressure | Up to 40 bar |
|---|---|
| Output Signal | 4...20 mA, pulse |
| Communication Protocols | HART |
| Material | Stainless steel, Hastelloy |
| Approvals | ATEX, IECEx, SIL |
| Protection Class | IP67 |
Specifies the intended applications for the variable area flowmeters for gases, vapours, and liquids.
Provides general safety guidelines, copyright, disclaimer, and liability information from the manufacturer.
Outlines critical safety rules for operating personnel, emphasizing proper training and adherence.
Describes the different versions of the H250 flowmeter, including M8, M9, and M10, and their features.
Emphasizes critical safety precautions for all electrical connection work, including power disconnection.
Provides comprehensive technical specifications for the H250 flowmeter, including measuring system, operating conditions, and installation.
Lists the flow rate ranges and corresponding pressure losses for water and air across different models and conditions.
To Next Page