Need help?Do you have a question about the KROHNE OPTIFLUX 4300 and is the answer not in the manual?
General| Type | Electromagnetic flow meter |
|---|---|
| Housing Material | Aluminum, stainless steel |
| Measurement Principle | Electromagnetic induction |
| Accuracy | ±0.2% of measured value |
| Process Temperature | -40...+180°C / -40...+356°F |
| Process Pressure | Up to 40 bar |
| Output Signal | 4...20 mA, pulse, frequency |
| Power Supply | 24 VDC |
| Electrode Material | Stainless steel, Hastelloy, Titanium |
| Lining Material | PTFE, PFA, rubber |
| Communication | HART, PROFIBUS PA/DP, Modbus, Foundation Fieldbus |
| Ingress Protection | IP67 |
| Process Connection | Flanged |
| Material | Various, depending on the version (see above) |
To Next Page