EN
page 35
USER SECTION
5. CONTROL PANEL AND SYMBOLS
The present specications are not intended as a functional description of the display.
To simplify function description the control panel display with function control keys is reported
below in accordance to operation modality.
5.1 Function keys during normal operation
A: Start cycle - User cycle Time Programming;
B: Shut down (Stand -By) - Stop cycle - Reset Alarm;
C: Cycle Selection;
D: Cycle Selection;
E: Granule cycle selection;
F: Water only cycle selection.
6. FEATURES
6.1 General features
The control unit managed by a microprocessor manages the following:
• boiler water load;
• tank water load;
• boiler temperature regulation;
• tank temperature regulation;
• functioning cycles;
• defect detection and dispaly.
pict. 7