kromo KP202E - SIGNALS AND ALARMS

EN
page 42
7. SIGNALS AND ALARMS
The alarm messages are displayed, based upon their meaning.
When displaying "DETERGENT LEVEL"add detergent in the detergent tank (only with
optional"SensorforChemicalsLowLevel").
Whendisplaying"RINSE-AIDLEVEL"addrinse-aidchemicalintherinse-aidtank(onlywith
optional"SensorforChemicalsLowLevel").
Whendisplaying"DOOR OPEN"meansthattheopendoordoesnotallowthemaneuver
tried, or a wash cycle was in progress, when lifting the door.
TYPE OF ALARM CAUSE REMEDIES
B1 BOILER NOT FILLED
Open the water supply valve and verify a proper water
supplyow.ContactTechnicalService
B2 BOILER SENSOR FAILURE
Contact Technical Service
B3 BOILER NOT HEATED
Contact Technical Service
B4 FAILURE IN RINSING
Contact Technical Service
B5 BOILER OVERTEMPERATURE
Contact Technical Service
E1 WASH-TANK NOT FILLED
Open the water supply valve.
Contact Technical Service
E2 WASH-TANK SENSOR FAILURE
Contact Technical Service
E3 WASH-TANK NOT HEATED
Contact Technical Service
E5 WASH-TANK OVERTEMPERATURE
Contact Technical Service
E6 TANK DRAINING FAILURE
Checktheoverowpipe.ContactTechnicalService
E7 WASH PUMP THERMAL RELAY 1
WASH PUMP THERMAL RELAY 2
Contact Technical Service
Table. 2